 |
PX & PX-D
SERIES
Compact sized and light weight
Available either in AC and DC
Pump head material in PP, PVDF or ETFE
Power requirement from 2.5w to 65w
Max capacity up to 65 l/min
Max head up to 12.5m |
 |
PS SERIES
Compact pumps for general service and hazardous
liquids
Pump head material in PP or ETFE
Available in single-phase or 3-phase
Connections in thread, hose or flange
Max capacity up to 120 l/min
Max head up to 20m |
 |
PW SERIES
High flow and economical pumps for less hazardous
fluids and general chemical
transfer
Pump head material in PP
Power requirement from 0.37kw to 11kw using
IEC motor
Max capacity up to 1400 l/min
Max head up to 37m |
 |
PW-F SERIES
High flow series pumps suitable for very corrosive
and hazardous fluids transfer
Pump head material in ETFE
Power requirement from 0.37kw to 11kw using
IEC
motor
Max capacity up to 1400 l/min
Max head up to 37m |
 |
PW-C SERIES
High flow and extra heavy duty pumps for very
corrosive, hazardous
and tough environment.
Pump head in ETFE-lined with metal casing
Power requirement from 0.37kw to 15kw using
IEC
motor
Max capacity up to 1500 l/min
Max head up to 40m |
 |
PW-XJ SERIES
Heavy duty, medium flow and high head pumps
for very
corrosive
and hazardous fluids.
Pump head in ETFE-lined metal casing
Power requirement from 5.5kw to 15kw using
IEC motor
Max capacity up to 600 l/min
Max head up to 60m |
 |
PH SERIES
PH Series pumps available up to 2 stages and
suitable for low flow and
very high head.
Specifically suitable for PCB machine and
other
applications
that required such performance.
Pump head in PPS ¨C for medium to high
corrosive
fluids.
Power requirement from 1.5kw to 11kw using
IEC motor
Max capacity up to 540 l/min
Max head up to 70m |
 |
PG SERIES
Medium flow and high head pumps in AISI 316
material
Suitable for solvents and alkaline
Pump head in heavy cast stainless steel 316
Impeller available in open or close type
Power requirement from 2.2kw to 15kw
Max capacity up to 550 l/min
Max head up to 62m |
 |
PW-SP SERIES
Self priming magnetic-driven pump
Wetted-end material in PP
Power requirement from 0.37kw to 0.75kw using
IEC
motor
Max capacity up to 250 l/min
Max head up to 15m
Max suction lift head 2m |
